Product Summary

The NCP1207ADR2G is a PWM Current-Mode Controller. It implements a standard current mode architecture where the switch off time is dictated by the peak current setpoint whereas the core reset detection triggers the turn on event. This component represents the ideal candidate where low part count is the key parameter, particularly in low cost AC/DC adapters, consumer electronics, auxiliary supplies, etc. Thanks to its high performance High Voltage technology, the NCP1207ADR2G incorporates all the necessary components/features needed to build a rugged and reliable Switch Mode Power Supply (SMPS).

Parametrics

NCP1207ADR2G absolute maximum ratings:(1)Power Supply Voltage, VCC, Drv: 16V; (2)Maximum Voltage on all other pins except Pin 8 (HV), Pin 6 (VCC) Pin 5 (Drv) and Pin 1 (Demag):0.3 to 10V; (3)Maximum Current into all pins except VCC (6), HV (8) and Demag (1) when 10 V ESD diodes are activated: 5.0 mA; (4)Maximum Current in Pin 1, Idem: +3.0/2.0 mA; (5)Thermal Resistance, Junctionto Case, RθJC: 57 ℃/W; (6)Thermal Resistance, SOIC version, RθJA 178 ℃/W; (7)Thermal Resistance;Air, DIP8 version, RθJA 100 ℃/W; (8)Operating Junction Temperature, Tj: 40 to +125℃; (9)Maximum Junction Temperature, TJMAX: 150℃; (10)Temperature Shutdown: 155℃; (11)Hysteresis in Shutdown: 30℃; (12)Storage Temperature Range: 60 to +150℃; (13)ESD Capability, HBM Model (All pins except HV): 2.0kV; (14)ESD Capability, Machine Model: 200V; (15)Maximum Voltage on Pin 8 (HV), Pin 6 (VCC) decoupled to ground with 10μF, VHVMAX: 500V; (16)Minimum Voltage on Pin 8 (HV), Pin 6 (VCC) decoupled to ground with 10μF, VHVMIN: 40V.

Features

NCP1207ADR2G features:(1)Free Running Borderline/Critical Mode Quasi Resonant Operation; (2)Current Mode with Adjustable Skip Cycle Capability; (3)No Auxiliary Winding VCC Operation; (4)Auto Recovery Overcurrent Protection; (5)Latching Overvoltage Protection; (6)External Latch Triggering, e.g. Via Overtemperature Signal; (7)500 mA Peak Current Source/Sink Capability; (8)Undervoltage Lockout for VCC Below 10 V; (9)Internal 1.0 ms Soft Start; (10)Internal 8.0 s Minimum TOFF; (11)Adjustable Skip Level; (12)Internal Temperature Shutdown; (13)Direct Optocoupler Connection; (14)SPICE Models Available for TRANsient Analysis; (15)Pb?Free Package is Available.

Diagrams

NCP1207ADR2G block diagram

Image Part No Mfg Description Data Sheet Download Pricing
(USD)
Quantity
NCP1207ADR2G
NCP1207ADR2G

ON Semiconductor

Current Mode PWM Controllers Quasi Resonant Current Mode PWM

Data Sheet

0-1: $0.67
1-25: $0.61
25-100: $0.46
100-500: $0.41
Image Part No Mfg Description Data Sheet Download Pricing
(USD)
Quantity
NCP100
NCP100

Other


Data Sheet

Negotiable 
NCP1000
NCP1000

Other


Data Sheet

Negotiable 
NCP1000P
NCP1000P

ON Semiconductor

Other Power Management 700V 500mA Switching

Data Sheet

Negotiable 
NCP1000PG
NCP1000PG

ON Semiconductor

Other Power Management 700V 500mA Switching w/OVP and Zero Duty

Data Sheet

Negotiable 
NCP1001
NCP1001

Other


Data Sheet

Negotiable 
NCP1001P
NCP1001P

ON Semiconductor

Other Power Management 700V 500mA Switching

Data Sheet

Negotiable